Professional Grade Concrete Overlays
Concrete Pro Seal

DESCRIPTION

Stone Edge Surfaces Pro Seal 2500 is a High Gloss, 25% solids, Pure Acrylic Solvent Based concrete sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete. Pro Seal 2500 is UV stable, non-yellowing, and is a very tough 100% pure acrylic sealer that will give your jobs a beautiful wet look that makes the colors “pop” and dry just a little darker and richer than our Pro Seal 2000.

Pro Seal 2500 is a true sealer but has the features and characteristics of a cure-and-seal. Concrete should be completely dry 48 to 72 hours for thin overlays and up to 28 days for ready-mix concrete, but with its enhanced features, you can apply Pro Seal 2500 earlier and it will act like a cure-and-seal and allow some breathing and outgassing. Pro Seal 2500 is clear in color and is 700 VOC so make sure you can use it in your state. Pro Seal 2500 comes in a 5-gallon
bucket.

MOST COMMON USES

As a full Gloss Finish Concrete Sealer. It is used on floors, driveways walkways and patios and more

APPLICATION

BASE/TOP COAT: Top Coat Gloss Finish Sealer

APPLICATION METHOD: Roll on with nap roller or can be sprayed using a “Chapin” Extreme type all metal sprayer.

WORKING TIME: Average 15 to 20 minutes

PRODUCTS USED WITH: Stone Edge Surfaces Overlays Anti-Slip Sand

COMMONLY APPLIED OVER:

  • Concrete Overlays

  • Concrete

COVERAGE:

Approximately 1,000 sqft per 5 Gallon Bucket





PRO SEAL 2500




Stamped Concrete
Pro Seal Supreme Semi-Gloss Finish
Concrete Spray Mix
Stamped Concrete Walkways
Let us help you get started today