Stone Edge Surfaces Primer 100 is a highly concentrated water based extreme bonding primer designed to permanently physically and chemically bond any Stone Edge Surfaces concrete overlay to a stable Concrete or “approved” Substrate.
Primer 100 can be applied to a properly prepped newer concrete, painted or sealed concrete, masonry, plaster, drywall, glazed tile, Styrofoam or adverse substrate.
Primer 100 is cut 50/50 with water on the job site, comes in a 5 Gallon pail (approx. 1500 sqft coverage) or 1 Gallon Jugs (approx. 300 sqft coverage).
MOST COMMON USES
• Vertical Primer • Horizontal Primer
APPLICATION
BASE/TOP COAT: Primer Bond Coat THICKNESS: Very Thin APPLICATION METHOD: Roller, Brush, Spray WORKING TIME: 5 to 15 minutes
PRODUCTS USED WITH:
All Stone Edge Surfaces Overlay Products that require a primer
COMMONLY APPLIED OVER:
Adverse Condition Concrete
Concrete
Stucco
Cement Board
Brick
Drywall
Tile
Painted Surfaces
Styrofoam
Concrete Block
COVERAGE: Primer 100 cut 50/50 with water = 200 to 250 sqft per gallon