Professional Grade Concrete Overlays
Pro Bond Scratch Coat
Concrete Pro Bond

DESCRIPTION

Stone Edge Surfaces Pro Bond is a  commercial grade, heavily polymerized, multi-use, base coat and extreme bonding Single Component just add water underlayment and repair concrete mix.

Pro Bond does NOT require Primer.

Stone Edge Surfaces Pro Bond is used as the base coat in several Deck and Balcony Waterproofing  systems and can be troweled or pumped.

Stone Edge Surfaces Pro Bond is used on Commercial Roofing as part of a LWIC roofing system where Pro Bond is used as a seamless, pumpable 100% adhesion to the Light Weight Concrete Substrate…Cover Board. Roofing Membrane is applied over the Pro Bond.

COMMERCIAL: Pro Bond has been tested and Certified to be Applied over SpexCrete 450 on Low Slope Roof LWIC roofing systems

Pro Bond can be troweled with and without added sand to create slope.

Pro Bond is used as a repair concrete to fill, rebuild, repair and smooth spalled and damaged concrete areas before applying an overlay.

Pro Bond is also used to repair larger “dead” cracks and can be used with fiber lath or mesh in a crack bridge application over “live” cracks.

Pro Bond can go from feather thin to 3+ inches deep, and can be applied with a loop roller as a scratch coat. Pro Bond, bonds easily to almost any substrate including LWIC, concrete, plaster, drywall, styrofoam, brick, block, tile gunite and more.

Pro Bond is used as a base coat for waterfall, cliff face, and rock formations. If you use Pli-Dek, Multicoat, Westcoat or other waterproof decking systems, or if you use any LWIC products…you will love Pro Bond!

50 LB Bag Gray: Part # WADM005

MOST COMMON USES

  • Base Coat repair concrete for filling spalled, chipped, broken and damaged concrete deck, patio, pool deck, walkway, floor, driveway concrete

  • Deep backfill,

  • Base Coat Underlayment for overlays

  • Pre-Sanded for to Create Slope and Crickets on roofs and rooftop decks

  • Deck Waterproofing System Base Coat

  • LWIC System pumpable seamless Cover Board

  • Waterfall/Water Feature, Boulder, Cliff & Rock Formation base coat

  • ASTM E84 Class A Fire and Smoke certified for roofs or  floors

  • Strong Manufacturing “Strong Pumps” certified pumpable for multi-stories.

  • Industrial, Commercial, and Residential Use

APPLICATION

BASE COAT: Underlayment

APPLICATION METHOD: 3.5 quarts water: Trowel, Loop Roller. 4 – 4.5 Quarts Water: Pump

WORKING TIME: 1 – 4 Hours

PRODUCTS USED WITH:

– LWIC foamcrete

– Metal Lath • Fiber Lath/Mesh

– SES Deck Resin & Fiberglass Mat

– Smooth Coat Mix • Stamp, Wall, Trowel & Spray Mixes

– Cement Board, Gunite & Pool Plaster

COMMONLY APPLIED OVER:

– Plywood & Metal Lath

– Plywood & Fiber Lath

– Concrete

– Adverse Condition & Spalled Concrete

– Existing Deck Waterproofing

COVERAGE: 1/8” over Lath 36 sqft, 1/4”- 24 sqft, 1/2” – 12sqft per 50 LB bag

Pro Bond
Concrete Decking
Pro Bond Base Coat over Wood Deck and Metal Lath





PRO BOND




Concrete Contractor
Pumping Pro Bond
Scratch Coat Concrete Repair
Pool Wall Scratch Coat
Pro Bond
Choosing the right concrete patching material
Pro Bond
Pro Bond Concrete
Using a Strong Pump from Strong Manufacturing to Pump Pro Bond
Strong Manufacturing
Strong Manufacturing pump Certicication of Pro Bond
Pro Bond
Concrete Deck
Base Coat with Slope
pro-bond cover board
Pro Bond 100% Adhesion to LWIC (Light Weight Insulated Concrete)
Pro Bond
Pro Bond Used in LWIC Roofing System as Cover Board
Pro Bond Concrete
Case Coat over Lath for Deck Waterproofing System
Concrete Overlays
Base Coat to repair Spalled Damaged Concrete Before Overlay Applied
Concrete Products
Base Layer Sloped from 1/4" to 1", No Sand Added
Pro Bond
Scratch Coat applied with Loop Roller
Decorative Concrete
Base Coat over Foam on Large Fire Boulder
Let us help you get started today