DECK & BALCONY
WATERPROOFING SYSTEM

ABOUT

Stone Edge Surfaces’ Deck and Balcony Waterproofing Systems are ICC and ASTM certified, fire rated, can be spec’d for commercial and residential use, for installation over plywood or concrete substrates. With 3 different Waterproofing Systems to choose from (Standard, Pro and Custom) architects and contractors can easily choose the best System for their project needs. All Stone Edge Surfaces Waterproofing Systems utilize our industry proven single component “just add water” products that provide incredible waterproofing, flexural strength and long lasting wear properties.

MOST COMMON USES:

  • Decks
  • Walk Decks
  • Balconies
  • Walkways
  • Rooftop Decks 
  • Stairs
  • Landings
  • Commercial
  • Residential
  • Apartment Complex 
  • Condo Complex
  • Restaurants
  • City, County & State Buildings

 

APPLICATION

LAYERS: Seam Waterproofing Layer using 40mil Seam Tape over Plywood. Then the Metal Lath Layer using 2.5 metal lath. Then the Base Coat Layer using Stone Edge Surfaces PRO BOND. Then a full Waterproofing layer using Stone Edge Surfaces Deck Resin and Fiberglass Sheet. Then the Slurry/Smooth Coat using Stone Edge Surfaces Spray Mix. Then the Texture Coat using Stone Edge Surfaces Spray Mix again. Final waterproofing layer is 2 coats of Stone Edge Surfaces Tintable Deck Seal.

THICKNESS: Base Coat over Lath 1/8” – 1/4”, Slurry/Smooth Coat 1/16” – 1/8”, Spray/Texture Coat 1/16” – 1/8”, Colored Sealer Coat 1/32”

APPLICATION METHOD: Trowel, Magic Trowel, Mortar Sprayer, Nap Roller

WORKING TIME: 15 to 45 Minutes per Coat

PRODUCTS USED IN SYSTEM: Stone Edge Surfaces Pro Bond, Pro Spray, Deck Seal, Deck Resin, Rain Buster Membrane Tape, Fiberglass Sheet, with locally sourced Metal Lath, Staples, Flashing, etc.

COMMONLY APPLIED OVER: Plywood and Concrete

Let us help you get started today