Stone Edge Surfaces CPR-Concrete Patch and Repair is a just add water, high-performance, multi-use, fast-setting (15 – 30 minutes), structural strength in 1 hour, high psi, no-shrink Concrete Patch and Repair material used for general and structural concrete repair from feathered edge to 4” thick. CPR is a polymerized concrete that can be troweled vertically, horizontally or overhead, has superior bonding strength and bonds to almost all concrete surfaces. CPR can be used in industrial, commercial and residential concrete repair, patching, rebuilding, grouting, doweling and anchoring, and can be used as an underlayment for overlays. CPR is easy to use, is walkable within 30 min to an hour, driveable within 4 hours, can take a broom finish, can be ground lightly, have overlays applied over it, can be polished…and can even be applied under water. And, unlike competitor products…CPR does NOT require a Primer and does NOT need to be wetted for an hour after application to keep it from cracking.
CPR-Concrete Patch and Repair Gray
Part #: FXCPR50 = 50 LB Bag
Part #: FXCPR20 = 20 LB Pail
MOST COMMON USES:
CPR can be ground to blend in, polished, you can apply a broom or other finishes, and it can be used as a quick setting scratch coat.
CPR is a polymerized concrete that can be troweled vertically, horizontally or overhead, has superior bonding strength and bonds to almost all concrete surfaces.
CPR can be used In industrial, commercial and residential grouting. CPR is used for Repairing and Patching both small spalled areas all the way up to large deep fill applications on any Concrete driveway, wall, pillar, support, barrier, patio, walkway, fence, parking structure, loading docks, warehouse floor and more.
CPR can be used for Doweling and anchoring, and can be used as an underlayment for most overlays or give it a broom finish for a stand alone application.
CPR can also be formed and shaped to rebuild broken concrete corners, edges, worn or damaged areas, and can be used in water environments.