The Stone Edge Surfaces 2-layer Multi-Story Flooring System is comprised of a Base Coat layer of a FOAMCRETE type material, and a Base Coat Topper Layer of Stone Edge Surfaces 7,000 PSI SwiftSet Self-Leveler.
SwiftSet Self-Leveler Base Coat Topper, has been tested, certified and approved by multiple foamcrete material manufacturers to be the Base Coat Topper over their material in commercial flooring applications.
Stone Edge Surfaces SwiftSet Self-Leveler has been tested for adhesion and strength, and has been “independently” pump tested and certified by ChemCoat against all major competitors as a 9 out of 10 for ease of use, pumpability and pumping distance of 300 feet.
SwiftSet has been independently ASTM E84 Fire and Smoke tested and certified with a Class A ratings.
A foamcrete type material is typically a single component, just-add-water, Ultra Lightweight Polymer Modified Underlayment designed for deep fill flooring applications, and to reduce the dead load weight by ~65% as compared to traditional concrete underlayment systems.
Stone Edge Surfaces SwiftSet Self-Leveleris a fast setting (2-4 hours), walkable in (4- 6 hours), “pre-sanded”, single component, just add water, polymer enhanced, non-gypsum, Portland cement and proprietary additive self-leveling underlayment top coat mix used to create a smooth flat and level surfaces for the installation of various flooring types.
When used together with a foamcrete material Base Coat, SwiftSet Self-Leveler and the foamcrete material create a very versatile lightweight concrete underlayment system that is as much as 65% less weight per SQFT than standard self-leveling multi-level floor underlayment systems.
MOST COMMON USES
High Rise Commercial and Residential Structures
Multi-Level Commercial and Residential Structures
THICKNESS: foamcrete material 1/2″ to 3″ – SwiftSet Self-Leveler 1/4″ to 3/4″
APPLICATION METHOD: Most common method is Pump, Squeegee, Magic Trowel, Gauge Rake, Porcupine Roller, Trowel
WORKING TIME: – Average for a foamcrete material is 10 – 15 minutes – SwiftSet Self Leveler: 10 – 20 minutes with a 2 – 4 hour set time in warm temperatures, +/- depending on temp, humidity.
PRODUCTS USED WITH: – Primer – foamcrete material
COMMONLY APPLIED OVER: – Concrete – Plywood
Pump Test Results
Pump Testing Results of SwiftSet Self-Leveler
SwiftSet Self-Leveler Base Coat Topper has been tested and certified to work with: